How the installation works – step by step

VIWA Villapaket is a smart and wireless solution for detecting water leaks before damage occurs. The system is specially developed for villas and larger homes where several rooms and water installations need to be secured – for example kitchens, bathrooms, utility rooms or technical rooms. By combining wireless sensors, a main control with valve and a smart door switch, you get complete protection that is easy to install and safe to use every day.

How the installation works – step by step

installation Vilapaket

1.

Step 1: Place the main unit and valve

Mounted on the incoming water line (usually in the utility room, laundry room or under the sink).


Choose between 1/2", 3/4" or 1" valve depending on the water pipe.


Plug in the power adapter and sensor wire (2.5 m long).

installation Vilapaket

2.

Step 2: Mount the wireless sensors

Delivered pre-programmed and ready to use.

Placed on the floor in rooms where water leaks may occur (e.g. under the sink, in the bathroom, by the water heater).

The system supports up to 99 sensors.

Dörrbrytare

3.

Step 3: Install the door switch

Mounted near the front door.

Used to easily turn off the water when you leave home and turn it back on when you get home.

installation Vilapaket

4.

Step 4: Test the system

Perform a test by placing a damp cloth against a sensor.

The valve should close automatically and you will receive an audible signal from the main unit.

Confirm that the door switch also controls the valve correctly.

What is included in the VIWA Villa Package?

  • 1x Main unit (for one valve, with sensor wire)
  • 1x 12V solenoid valve (1/2", 3/4" or 1")
  • 1x Door switch (wireless)
  • 1x Wireless sensor (with adapter)
  • 1x Wireless sensor (battery powered)
  • Possibility to connect up to 99 sensors
  • Possibility to amplify the signal with a repeater

Advantages of VIWA Villa Package

  • Wireless – easy installation without wiring
  • Smart door switch for daily water shut-off
  • Scalable – connect more sensors at
    needs
  • Safe – the valve is normally open and only closes in case of alarm
  • Nordic design & quality
  • Extra long sensor wires and accessories are available